The Rooftop Tent is a safety concern friend on your adventure live. If you are a busy guy, you will look for a long trip or a campaign. But nowadays, things are becoming easy day by day. The Rooftop tent is the ultimate solution for those who didn’t want to make a tent if they go to different places on one trip.
But if you owned a rooftop tent, you will wonder,” can you put this on yourself?”.The answer is quietly depending on the dimensions, weight, and height of the rooftop tents. These measurements make installing the rooftop tent quite tricky. So make it easy; follow these three simple methods of installing a rooftop tent by yourself.
Installing A Roof Top Tent By Yourself
I know many of us didn’t know how to install a rooftop tent properly. There are mainly three recommended methods for installing a rooftop tent by yourself. These are using a hoist, sliding the tracks and the final was completely solo. In today’s article, I am going to discuss these three simple methods below to make this task easy.
Check Rooftop Tent Recommendation
Rooftop Tent Recommendation
Method 01: Using a Hoist For Pulling Out The Rooftop Tents
The hoist is the safest and easiest method. You can mount a rooftop tent by yourself by using it. A hoist is a standard tool that we quickly find out in our garages. Hoist bears the weight of the roofs. It allows it to lift and load the value securely. The whole process is working as a pulley system. Follow these steps to do this task vividly.
Step 01. Check out the position first
Before using a hoist, check out the position of the roofs first. Then pull the tent under the lift. After that, wrap the heavy strap hinge securely.
Step 02. Lift the tent for sure about it enough spaces
After securely place the straps, lift the tent. Lift it as much as you can to clear enough space for the vehicles.
Step 03. Position the vehicle
It is the third step in this task. You should have done this work carefully. Before positioning the vehicle under the tent, make sure about its weight, not too much or too little.
Step 04. Keep the tent lower and then secure it
keep your tent more down. Then connect it to the mounting components.
The most prominent site of using a hoist is that it is easy to add and remove.
The rooftop tent would be secure if you attach a strap to the ground. If the tent’s weight becomes too high, the tent may slip or sway in the wind. Some hoist systems have the required power. You can check them on the websites. All of these products had directed by muscles and physics.
Method 02: Install Your Rooftop Tents With A Tracks
Tracks work as inclined planes. It has special advantages over your constraint application that you usually want to put in. One type of ramps uses in the channel to drag the tent upwards and stay up on the tent’s roof.
It is easy to install a rooftop tent with tracks if you want to do it without a hoist.
Step 01. Position the track first
Install with tracks, First, you need to set it. Lay the tracks onto the upwards of the roof rack. It refers to be rear or a side of the vehicle.
Step 02. Secure the track righteously
Layout the tracks, secure them with both the ground and roof, by doing this, aware of the weight that might not be pushing up to dislodge.
Step 03. Push the tent
Push the rooftop tent up the tents as much as the weight you may bear. Don’t do the work so hurriedly. It may cause harm to you. Do these tasks lightly.
Step 04. Pushover the rooftop tents at the edges of the roof racks slightly
Push the rooftop tents upwards onto the mountain tracks. Focus on its edges if the tent roof didn’t parallel with the vehicle roof. You can pivot the racks and begin to push them.
Step 05. Finally, mount the tent
Mounting the tent is the final job of this method. Mount the tent securely for avoiding sketches or any fallout.
Method 03: Install It Without Using Any Tools
Suppose you don’t want to install your rooftop with the help of tools. Then there is an alternative also. You can install it solo without using any tools. All of these tools that will recommend below would make your job too much fast and more accessible.
Step 01. Position the tent to lean it against the roof rack
Position the tent to lean it against the roof racks at some stages as back or side to side.
Step 02. Stand the tent on its side and begin to lift
Stand the roof tent on its side. For a reason, it won’t have enough distance to touch the roof racks. After that, begin to lift it. Concern about that the tent must have felt the roof racks.
Step 03. Finally mounted it on a pivot motion and lift it up and down
In the final stages, turn out the roof tent on the edges as the tent touches the edges. Start it for up and down like pivot motions. Then lift and push the remaining tent on the top of the roof racks. And then finish the job correctly.
It is easier for you if you owned a pickup truck or a ute. You can do this job in two sections. The first stage is getting onto the pickup track. The second is up onto the roof of the vehicles.
Things To Consider When Installing A Roof Top Tent By Yourself
Before installing a rooftop tent by yourself, you need to buy some tools. Try to purchase the things that will meet up your budget.
Weight is a primary thing in this installing task. In contrast, you wanted to install the tent yourself. Think about its weight. That should be adjustable to your abilities.
The above three methods must have done by an expert person. Sometimes while you are trying to install the roof without any tools. It may slip over. Maximum time, the overweight tent may lift another person over your head. The same things also can happen while you are trying to install it with a hoist or tracks.
All these above three methods are time-consuming and save your penny too. If you can carry a mover blanket with you, you can avoid any awkwardness. The disadvantages of rooftop tents are many. These are the danger of injuring, damage the vehicles, damage the tent, etc. But all these problems can easily avoid if you concern about your safety. Moreover installing a rooftop tent by yourself can be your first choice if you enjoy it. You may fail for the first time but never lose hope. Focus on it properly for getting the skills of installation.
More Camping Setups:
- CVT Tent Setup: Full Instructions
- How to Put up a Hammock without Trees:6 Easy Methods
- How to Set up a Roof Top Tent: Easy Steps You Can Follow
- How to Set Up a Camping Hammock: Ultimate Tips and Tricks.
- How to Set up A Tent: 7 Simple Steps
- How To Put Up A 6 Man Tent In the Easiest Way
- How to Build an Outdoor Canopy Frame: An Easy Process
- How to Build a Shed Using PVC Pipe: Best Simple Way
- How Do You Start Your Suv Camping Setup With 2 Simple Methods