Are you exciting about your outdoor trip? Camping in your car not only increases the happiness of your adventures journey but also saves up your penny to rent a hotel. How can we start up a campaign on a car? We need to take what kinds of things with us and what to not it’s a common headache to all of us.

Sometimes we forget to carry the essential Camping accessories with us for lacking space inside the car.

Before starting a plan for going on a trip, you should consider choosing a jeep car to accommodate all of your utensils.

So check below for getting a simple two methods for SUV camping setup inside your camp car easily.

The Ultimate Ways/ DIY For SUV Camping Setup:

As you know, camping outdoor is not so easy because you wouldn’t get the facilities theirs like your home. It would help if you had carried some important things to make your trip comfier and anxiety-free.

Let us have a vivid discussion on the two Suv camping setup methods or SUV camper DIY with Car camping essentials lists that car campers can easily set up your car quickly for camping.

Method 01. Make a Wooden Frame and Two Table Base Inside Your Car:

For doing these SUV Camping Ideas, you need some things to buy or if you have already these items then reuse them. These are super easy to carry and make your trip more gracious than ever.

Step 01. Parts list for your camping trip:

Parts list	Purpose
affordable plywood or solid wood CHECK ON AMAZON	To make a wooden frame and two table base counter sites. It should have 4- inch height and 8-inch width sheets.
Two 2.5 gallon water jugs CHECK ON AMAZON	A plastic bowl for the sink
An adhesive Vinyl CHECK ON AMAZON	It is used to cover the plywood for your countertop
Heavy-duty drawer slides CHECK ON AMAZON	To use on your wooden drawer
LIKE IT modular drawers	To use on your accessories storage and consider buying a tall medium and a short-medium drawer

Step 02. Built the base of your wooden drawer and secured it with heavy-duty drawer slides:

First, you have to build a wooden base. For this, cut out a piece of plywood into your trunk shape. It would help if you made it smooth for easy removal. Drill the wood through 3 to 4 spots into the floor and then bolt through each hole and secure it with two nuts.

Then drill the hole and ensure that it will adjust with your car floor. Be aware of your spots that might be bigger than the nuts which rely on under the piece of plywood.

Then screw the block of wood under your fridge and drawers to prevent unnecessary movement while driving. Then you can move on to building the frame. It will hold the drawer that you are going to make.

Join the structure into each other and secure it with a nut. Shape the frame as a small box. Keep in mind that you have to leave enough space on the top of the box to keep the water jugs inside your car. And drawer chamber to keeping the kitchen accessories and stove on it.

Then make the sink and drawer. It was pretty easy.

You need to cut out a hole inside plywood and make extra counter space for a chopper board. Make these smooth for easily in and out for extra storage.

Remember to cut out the sink on your salad bowl shape. But don’t adjust it with glue because of your easy cleaning.

Step 03. Secure the wide cabinet with latches and then use vinyl to cover up the plywood to the top of the counter wood:

Finally, secure the wide cabinet with a latch on its back. It will prevent your extra counter space from being flip up and carry excess weight on it. You can line it up by adding leftover plywood to the base of it.

After that, add vinyl on the top of the counter to cover the plywood. Then attach a handle and various types of hook for hanging utensils, jugs, etc while you’re cooking. It would be better to attach a bungee for holding your water pot in place.

Then paint the frame with any cool color or tattoo.

Steps 04. Finally, keep your utensils on it:

Finally, keep the frame inside your car and fascinated it with a full pack up. Show every one of your creativity.

Method 02. Make Your Car Camping By Using Wooden Platform

You can make your camping more precious by using solar panels and some cool accessories. These are giving below :

Step 01. You need to buy some cool accessories:

These are the products you need to buy to keep your trip more reliable and anxiety-free.

**Tools that you need for making a comfortable platform inside the car:

Cool Accessories List	Purpose
4″ inch× 8″inch× 0.75″ plywood sheets CHECK ON AMAZON	For your car platform
1.5″ inches screws CHECK ON AMAZON	For joining the sheets
30″ inch piano hinge CHECK ON AMAZON	For making a folding joint for your platform
Gorilla glue wood CHECK ON AMAZON	For joining the plywood pieces
circular saw with 40teeth CHECK ON AMAZON	To cut out the sheets and plywood
Adhesive carpet squares CHECK ON AMAZON	For covering the surface of your wood
4″ inch twin folding mattress CHECK ON AMAZON	For making a comfortable bed for your campaign

Step 02. Measure your car floor and cut out the plywood :

First of all, measure your car floor and cut out the plywood by the circular saw into one big piece and three thin slices. The big one must have to 42″ in height and 31″ in width. The smallest one 28″×85″×7.5″.

Step 03. Then joint the thin layers of plywood over the wide one with glue:

After that, joint the three thin layers of plywood with glue over the wide one.

When the glue becomes dry, make a drill over the wood around 5 to 6 inches.

Please do the same things on the third piece after attaching the glue to it.

Step 04. Fit the piano hinge under the plywood and secure it with screws :

After that, fit the piano hinge under the plywood and secure it with screws.

It will make a good portable design as a doorwards on the plywood.

Step 05. Finally, fit it on the car and cover the surfaces with adhesive carpet squares :

Finally, fit the wooden platform inside of the car.

And cover the surfaces with adhesive carpet squares.

Then Put your 4″ inch twin folding mattress on it.

[Tricks: You can make a two-thin plywood leg under the third piece where you attach the piano hinge.

Make support by connecting four little wooden pieces under it. It will guide you when you need to fold it.]

Then cover the chamber of the platforms with all your campaign accessories.

Let’s know some benefits of these 2 methods to know whether you need both the methods or just one of them.

Benefits of 2 Methods
Method- 1	Method- 2
Carry every little utensil easily	Easily carry camping accessories
It won’t let the accessories move when driving	Comfort like you are at home
Store kitchen accessories and water jugs safely	Can sleep inside the car

Conclusive Words:

Well, these are two kinds of DIY for making your Suv camping setup. Different types of DIY weren’t so easy to make, and after making it, anyone found it just worst. But these two methods can not disappoint you. After making it, you just feel awesome. Found the tools that you need to make these setups. Think deeply about these recommendations and make a sketch first for making your work so easy. You will feel like you have the SUV camper conversion kits with you if you get this task done.

Try the one method between them and prefer which is affordable and easy to make for you. Hopefully, your trip will make it so exciting and enjoyable with new experiences and more adventurous.